7 Series E66 730Li (N52) SAL
Release screws (1).
Detach refrigerant lines (2) in direction of arrow.
Installation:
Replace sealing rings and moisten with refrigerant oil.
Release screw (1).
Detach refrigerant lines (2) in direction of arrow.
Remove plate (3).
Installation:
Replace sealing rings and moisten with refrigerant oil.
Release screws (1).
Detach refrigerant lines (2) in direction of arrow.
If necessary, remove plate (3).
Remove expansion valve.
After installation:
•
Evacuate and fill A/C system
RA Removing and installing/replacing expansion valve (with rear A/C system)
BMW AG - TIS
07.02.2013 23:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -