7 Series E66 730Li (N52) SAL
64 51 591
Removing and installing/replacing evaporator
(High automatic A/C)
Warning!
Avoid contact with refrigerant and refrigerant oil.
Follow safety instructions for handling refrigerant R 134a .
Follow safety instructions for handling refrigerant oil.
Note:
The time value given for this work operation does not include
drawing off, evacuating and filling the A/C system!
•
Drain off air conditioner
Important!
Risk of damage!
Restart engine only when A/C system has been correctly
filled.
Note:
If A/C system is opened for more than 24 hours: Replace
desiccant insert for A/C system
Comply with notes and instructions on handling fiber-optic cables.
Necessary preliminary tasks:
•
Disconnect battery negative lead
•
Remove heater
•
Remove heating element
After installation:
•
Venting cooling system and checking for water leaks
Important!
Do not bend cooling fins.
If necessary, clean/align cooling fins with slat comb.
RA Removing and installing/replacing evaporator (High automatic A/C)
BMW AG - TIS
07.02.2013 23:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -