7 Series E66 730Li (N52) SAL
72 11 102
Removing and installing/replacing all rear
seat belts
Warning!
Read and comply with safety regulations for handling airbag
modules and pyrotechnical belt tensioners.
Incorrect handling may trigger the pyrotechnical seatbelt
tensioner or side airbag and thereby cause injuries.
Switch off ignition!
Removing left and right seat belts:
Release screws (1) on left and right.
Unscrew nut (3).
Installation:
Guide lug of belt retractor must be seated in opening in body.
Tightening torques: 72 11 20AZ
.
Key:
1.
Retaining screw
2.
Belt retractor
3.
Securing nut
4.
Belt retractor
Release screws (1) on left and right.
Tightening torque: 72 11 23AZ
.
Disconnect plug connection (2).
Remove upper strap (3) on left and right.
RA Removing and installing/replacing all rear seat belts
BMW AG - TIS
08.02.2013 00:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
