7 Series E66 730Li (N52) SAL
Removing middle seat belt (except E67):
Release screws (1).
Tightening torque: 72 11 21AZ
.
Remove lower straps (2) and center upper strap (3).
Installation:
Ensure correct installation sequence and installation position:
•
Fittings of center lower strap/center upper strap must rest on
stop (1).
•
Secure lower strap on left and right through guides (2).
RA Removing and installing/replacing all rear seat belts
BMW AG - TIS
08.02.2013 00:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
