7 Series E66 745Li (N62) SAL
11 12 719
Milling cylinder head sealing face
(N62/N62TU)
(cylinder head dismantled)
Check evenness of cylinder head sealing face with a standard
straight-edge (1).
Note:
Maximum plane deviation: longitudinal 0.10 mm.
Note:
Maximum plane deviation: transversal 0.05 mm.
-
Machining limit
Note:
A cylinder head seal 0.3 mm thicker than usual can be obtained
for machined (milled) cylinder heads.
RA Milling cylinder head sealing face (N62/N62TU)
BMW AG - TIS
11.02.2013 06:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -