7 Series E66 745Li (N62) SAL
The letters (1) denote the bearing shell classification for the
relevant bearing position from 1 to 5 in the crankcase and is
located on the transmission side in the Vee. The first letter on the
left applies to the first bearing position at the front.
Y= yellow
G= green
V= violet
Note:
Main bearing caps (1, 2 and 3) are identified with punch
numbers.
Main bearing caps (4 and 5) are not identified.
Note:
Main bearing cap number 5 can be identified by the
surfaces (1) for the stop disks of the thrust bearing.
Unscrew thread support bushings in main bearing caps.
RA Replacing all main crankshaft bearing shells (N62/N62TU)
BMW AG - TIS
11.02.2013 06:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -