7 Series E66 745Li (N62) SAL
Install eccentric shaft sensor (2).
Insert screws and tighten down eccentric shaft sensor (2).
Remove special tool 11 9 474 .
Remove special tool 11 9 472 and special tool 11 9 475 .
Ends of compression rings (1) point upwards.
Make sure compression rings (1) are engaged at ends.
RA Removing and installing/replacing right inlet camshaft (N62 to 9/03)
BMW AG - TIS
11.02.2013 06:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 13 -