7 Series E66 745Li (N62) SAL
Removing:
Clamp special tool 31 3 341 with guide (1) in vice.
Fit special tools 31 3 381 and 31 3 382 from above on
special tool 31 3 341 until locking pins (2) can be felt and
heard to snap into place.
Check seating of special tools 31 3 381 and 31 3 382 ,
correct if necessary.
Clean coil spring to remove heavy contamination.
Accommodate coil spring with special tools 31 3 381 and
31 3 382 .
Warning!
Upper coil of coil spring must rest completely in recess of
special tool 31 3 382 !
Compress coil spring until stress on piston rod is relieved.
Release nut (gripping piston rod in the process).
Remove joint seat, support bearing, spring plate with bearing and
spring pad.
Relieve tension on coil spring and remove from special tool
31 3 382 .
RA Replacing front left or right spring strut (standard suspension, build date from
BMW AG - TIS
11.02.2013 09:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -