7 Series E66 745Li (N62) SAL
Important!
Coat bearing bushing in rear axle carrier and new rubber
mount with Circolight (refer to BMW Parts Service).
Align rubber mount by way of slots (1) to vehicle transversal
direction.
Insert rubber mount from side with larger diameter into special
tool 33 4 165 .
Note:
Milled recess (1) of special tool
33 4 165 must rest at top on
rear axle carrier.
Draw in rubber mount with special tools 33 3 314 , 33 3 315 ,
33 4 166 , 33 4 165 and 33 4 164 as far as it will go. Make
sure special tool 33 4 166 is correctly seated.
Note:
Rubber mount must be seated flush in rear axle carrier. If
necessary, rotate special tool 33 4 164 through 90
°
and draw in
overlap.
RA Replacing all front rubber mounts for rear differential mounting
BMW AG - TIS
11.02.2013 10:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -