7 Series E66 745Li (N62) SAL
51 13 401
Removing and installing / replacing handle
strip (on rear lid)
Necessary preliminary tasks:
•
Remove both rear lights in rear lid
Release screws (1).
Snap handle strip (2) in direction of arrow out of clips (3) and
remove.
Installation:
If necessary, replace faulty clips (1).
Replacement:
Remove both bulbs for number/licence plate light.
RA Removing and installing / replacing handle strip (on rear lid)
BMW AG - TIS
11.02.2013 13:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -