7 Series E66 745Li (N62) SAL
51 13 280
Removing and installing trim strip on roof
frame at left or right
Important!
Work must be carried out with a second person assisting (risk
of damage).
Trim strip must not be bent and seals must rest correctly on
windscreen (wind noises).
First lever out trim strip (1) at rear, then unclip remainder and pull
at front out of seal (3).
Installation:
First push trim strip (1) at front into seal (3), clip in at rear flush
with edge (2) and then clip in remainder.
Important!
Replace clips (1 and 2) after each removal.
Installation:
Locks (3 and 4) of clips (1 and 2) must not be damaged.
Note:
For long version, seven clips (2) are fitted.
If necessary, replace faulty clips (1 to 4) or seal (5) of trim
strip (6), refer to
Replacing trim strip on roof frame .
RA Removing and installing trim strip on roof frame at left or right
BMW AG - TIS
11.02.2013 13:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
