7 Series E66 745Li (N62) SAL
Slacken adjusting screw (1).
Wiper blade must rest above marking (2) on windscreen.
Place special tool 00 9 230 at height of pivot point of wiper blade
on windscreen.
Turn wiper arm until no gap can be seen between special tool
00 9 230 and wiper blade.
Hold wiper arm in this position and tighten down adjusting
screw (1).
Tightening torque, 61 61 10AZ
Perform one-touch wiping twice. Check adjustment and repeat if
necessary.
RA Checking/adjusting contact angle of windscreen wiper arms on windscreen
BMW AG - TIS
11.02.2013 18:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
