7 Series E66 745Li (N62) SAL
64 51 600
Removing and installing/replacing evaporator
for rear air conditioner
Necessary preliminary tasks:
•
Remove rear air conditioner (with cooler box).
Disconnect plug connection (1).
Installation:
Make sure fitting (2) is correctly seated in mounting (3).
Unscrew nut (1).
Remove cooler box (2) in direction of arrow from rear air
conditioner (3).
Unlock plug connection (1) and disconnect.
Unlock plug housing (2) and detach towards bottom.
Release screws (3).
Release clip (4).
Remove cover (5) in direction of arrow.
Installation:
Make sure cover (5) is correctly seated on grommet (6).
RA Removing and installing/replacing evaporator for rear air conditioner
BMW AG - TIS
11.02.2013 20:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
