7 Series E66 745Li (N62) SAL
65 77 710
Removing and installing (replacing) left A-
pillar sensor
Warning!
Note airbag safety instructions!
Incorrect handling can activate airbag and cause injury.
Note:
Follow instructions for handling optical fibers.
Necessary preliminary tasks:
•
Disconnect battery negative lead and cover.
•
Remove footwell side trim panel on A-pillar.
•
Place carpet slightly to one side.
Unfasten plug connection (1) and disconnect.
Unscrew bolt (2).
Unscrew nuts (3).
Installation:
Tightening torque 65 77 4AZ
.
Make sure sensor is mounted without play.
Remove A-pillar sensor (4).
RA Removing and installing (replacing) left A-pillar sensor
BMW AG - TIS
11.02.2013 20:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -