7 Series E66 745Li (N62) SAL
Unlock plug connections (1) and disconnect.
Unlock catches (2).
Installation:
Make sure driver's seat sensor (3) is correctly engaged.
Feed out driver's seat sensor (3) in direction of arrow and
remove.
Replacement:
Carry out coding/programming.
Observe following IDC specifications:
•
Programming
•
Coding
•
Car & Key Memory
•
CD "CIP"
RA Removing and installing (replacing) driver's seat sensor
BMW AG - TIS
11.02.2013 20:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -