7 Series E66 750Li (N62TU) SAL
Feed out exhaust adjustment unit (2).
Secure timing chain to prevent it from sliding down.
Installation:
Installation of inlet and exhaust adjustment units is described
separately from removal.
Important!
Danger of mix-up:
Inlet and exhaust adjustment units are different.
Mixing up the inlet and exhaust adjustment units will cause
damage to the engine.
1.
Inlet adjustment unit (1) is marked with EIN and IN.
2.
Exhaust adjustment unit (2) is marked with AUS and EX.
Note:
The exhaust adjustment unit on cylinder bank 1 to 4 also has a
metal clip (3) for driving the vacuum pump.
RA Removing and installing/replacing inlet and exhaust adjustment units on right si
BMW AG - TIS
12.02.2013 14:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -