7 Series E66 750Li (N62TU) SAL
11 37 006
Removing and installing/replacing left
eccentric shaft (N62 from 9/03 and N62TU)
(cylinder bank 5 to 8)
Necessary preliminary tasks:
•
Remove servomotor for left eccentric shaft
•
Remove ignition coils on cylinder bank 5 to 8
•
Remove spark plugs on cylinder bank 5 to 8
•
Remove left cylinder head cover
•
Remove left inlet and exhaust adjustment units
•
Remove left inlet camshaft
Eccentric shafts from 2/2003:
Note:
Eccentric shafts of cylinders 1 to 4 and 5 to 8 are identical
parts.
Important!
Note installation direction of eccentric shafts.
Depending on the side on which the magnet wheel is fitted,
the eccentric shafts are used for cylinders 1 to 4 or
5 to 8.
Incorrect assembly will result in engine damage.
Note:
The work steps are only described on one bearing position. The
procedure is identical for the other bearing positions.
Carefully tilt bearing shell (1) to one side and simultaneously
remove towards top.
RA Removing and installing/replacing left eccentric shaft (N62 from 9/03 and N62TU)
BMW AG - TIS
12.02.2013 14:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -