7 Series E66 750Li (N62TU) SAL
17 00 009
Checking cooling system for leaks (N62)
Special tools required:
•
17 0 002
•
17 0 005
•
17 0 007
•
17 0 008
Warning!
Danger of scalding!
Only perform this work after engine has cooled down.
Checking for leaks in cooling circuit:
Open cap on coolant expansion tank.
Fit special tool 17 0 002 /17 0 005 .
Build up gauge pressure of 1.5 bar, wait approx. 2 minutes.
Cooling system is leak-free if pressure drop is max. 0.1 bar.
Checking function of cap:
Detach rubber (1) from special tool 17 0 002 .
Fit special tool 17 0 007 /17 0 008 .
RA Checking cooling system for leaks (N62)
BMW AG - TIS
12.02.2013 15:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -