7 Series E66 750Li (N62TU) SAL
Support rear differential with workshop jack and special tool
33 4 420 .
Important!
Observe gap between special tool 33 4 420 and dust
plates.
To avoid grinding noises, make sure the dust plates are not
damaged (e.g. bent).
Unfasten screws.
Vehicle without vibration damper:
Unfasten nut and remove screw.
Slowly lower workshop jack and remove rear differential towards
rear.
Vehicle with vibration damper:
Release screw (1).
Tightening torque 33 17 9AZ
.
Remove vibration damper (2).
Release nut and remove bolt (3) towards rear.
Slowly lower workshop jack and remove rear differential towards
rear.
RA Removing and installing/replacing rear differential
BMW AG - TIS
12.02.2013 17:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -