7 Series E66 750Li (N62TU) SAL
Installation:
The small roller sun blind also acts as the rear guide rail of the
large roller sun blind (3).
Therefore insert small roller sun blind correctly in guide (1) and
brush cable (2) of large roller sun blind (3).
Installation:
Following parts on roller sun blind (3) must not be damaged or
missing:
1
Rubber mount
2
Pull plate
4
Sliding member
Adjusting:
If cover of roller sun blind (1) sags at edge (A) or (B), this can
be corrected by turning eccentric (2).
RA Removing and installing/replacing roller sun blind on fixed side window of left
BMW AG - TIS
12.02.2013 20:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -