7 Series E66 750Li (N62TU) SAL
51 24 151
Removing and installing/replacing hydraulic
cylinder for rear lid (electrohydraulic-fully
automatic)
Necessary preliminary tasks:
•
Follow instructions for automatic rear lid actuation
(electrohydraulic)
•
Disconnect hoses on hydraulic unit
•
If necessary, remove transmit-receive unit
Open cable holders (2 and 4).
Release cable tie (3).
Feed out hydraulic hoses (1).
Installation:
Routing of hydraulic hoses (1):
-
behind cables (3)
-
correctly into cable holders (4)
-
right side with 2 cable ties (2)
RA Removing and installing/replacing hydraulic cylinder for rear lid (electrohydrau
BMW AG - TIS
12.02.2013 21:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
