7 Series E66 750Li (N62TU) SAL
51 45 030
Removing and installing instrument panel
trim
Necessary preliminary tasks:
•
Remove both panels for front roof pillar.
•
Remove lighting control unit.
•
Remove instrument cluster.
•
Remove fixture for steering column switch.
•
Remove control display.
•
Remove control panel for heater - A/C system.
•
Remove footwell side trim panel on A-pillar on left.
•
Remove panel for (active) knee protector, left.
•
Remove function carrier on panel for instrument panel.
•
Remove center console carrier section.
•
Remove airbag module on passenger side.
•
Remove footwell side trim panel on A-pillar on right.
Disconnect plug connections (1) and (2).
1
Ignition starter switch
2
Solar sensor
Release screw (1) on instrument panel (2) at bottom left.
RA Removing and installing instrument panel trim
BMW AG - TIS
12.02.2013 21:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
