7 Series E66 750Li (N62TU) SAL
Release screws (1).
Remove drive (4).
Detach flex shaft (3) with holder (2).
Activate the operating switch for the seat position adjustment:
A) No function:
-
Disconnect plug connection on drive.
-
Connect new drive and check function.
-
Gear is O.K. if drive runs.
Assemble seat.
B) Drive running:
-
Gear for longitudinal seat adjustment defective.
Removing gear for longitudinal seat adjustment:
Release screws (1).
Remove worm gear (2) on left and right with cover.
Release screws (1) on upper rail on left and right.
Note:
The seat can now be adjusted together with the upper rail.
Remove front seat.
Replace both seat rails.
RA Additional work (normal/electric) with defective drive/gear for longitudinal adj
BMW AG - TIS
12.02.2013 22:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -