7 Series E66 750Li (N62TU) SAL
Release screws (1).
If necessary, unclip plug connection.
Remove expansion valve cover (2) in direction of arrow.
Installation:
Retaining hooks (1) must engage fully in mounts (2).
Release screw (1).
Detach refrigerant lines (2) in direction of arrow.
Remove plate (3).
Release screws (1).
Detach refrigerant lines (2) in direction of arrow.
Remove plate (3).
Remove expansion valve.
RA Removing and installing or replacing expansion valve
BMW AG - TIS
13.02.2013 02:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -