bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Removing And Installing_replacing Starter (M57)|Page 656 > < 2 RA Replacing Voltage Regulator|Page 653
Page 1
background image

12 41 020

Removing and installing/replacing starter
(M57)

Note:

Read fault memory. Switch off ignition.

Instructions for disconnecting and connecting battery,

refer to General Information MG12.

Disconnect and cover battery negative lead.

Remove rear splash guard

Release nut (1) on starter motor.

Installation:

Tightening torque, 12 41 4AZ.

Detach positive lead (2) from solenoid switch on starter motor.

Detach battery positive lead (3) from solenoid switch on starter
motor.

Release nuts (1).

Detach control leads from solenoid switch on starter motor.

Installation:

Tightening torque, 12 41 4AZ.

RA  Removing and installing/replacing starter (M57)

BMW AG - TIS

03.02.2013  19:30

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

1 RA Removing And Installing_replacing Starter (M57)|Page 656 > < 2 RA Replacing Voltage Regulator|Page 653