X Series E53 X5 3.0d (M57) OFFRD
Installation location of temperature sensor:
Under intake air manifold at rear.
Note:
This illustration shows a 4-pin plug.
For purposes of clarity, this work step is shown without the
starter motor and on a removed engine.
Disconnect 2-pin plug (1).
Fit special tool 11 7 020 .
Remove 2-pin temperature sensor.
Tightening torque, 13 62 2AZ .
Installation:
Replace sealing ring (1) of temperature sensor (2) if
damaged.
RA Replacing coolant temperature sensor (M57)
BMW AG - TIS
03.02.2013 19:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
