X Series E53 X5 3.0d (M57) OFFRD
Important!
Catch and dispose of emerging transmission fluid.
Unscrew bolt (1).
Withdraw hydraulic lines (2) to ATF cooler from transmission
housing.
Installation:
Replace sealing ring.
Important!
Special tool 24 5 301 must be provided with an additional
bore hole as shown in illustration.
To achieve a stable assembly position, this bore is necessary
for retrofitting the special tool 24 5 301 .
Assemble special tools 00 2 030 / 24 5 301 / 24 5 305 . To
do so, insert pivot pin into rear bore of special tool 24 5 301 .
Important!
Adjust special tool as described above.
Only in this way is it ensured that the transmission unit rests
safely on the special tool 24 5 305 and does not tilt.
Support transmission and transfer case with special tools
00 2 030 / 24 5 301 / 24 5 305 .
RA Removing and installing automatic transmission (A5S 360R / 390R)
BMW AG - TIS
03.02.2013 20:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -