X Series E53 X5 3.0d (M57) OFFRD
33 21 000
Removing and installing/replacing left or right
output shaft
Warning!
Scalding hazard!
Only perform the following tasks after the vehicle has cooled
down.
Apply handbrake.
Remove rear wheel.
Version with ride-height control: Deactivate and drain air
spring/suspension system
Unscrew collar nut.
Installation:
Replace collar nut, apply a light coating of oil to contact surface
and tighten down.
Tightening torque 33 41 3AZ
.
Secure collar nut by peening on flat areas of output shaft.
M54, M62: Remove rear muffler from centre muffler.
M57, M57TU, N62: Remove exhaust system.
RA Removing and installing/replacing left or right output shaft
BMW AG - TIS
03.02.2013 23:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -