X Series E53 X5 3.0d (M57) OFFRD
35 21 000
Removing and installing/replacing brake
pedal
Remove lower right trim from instrument panel.
If necessary, remove panel for pedal assembly.
If necessary, remove reinforcement plate and switch unit.
Note:
After installation: Adjust brake light switch.
Raise lugs on retainers (1) and detach retainers.
Unhook spring (2).
Pull out retaining pin (1) and detach piston rod from brake pedal.
Remove brake pedal (2).
RA Removing and installing/replacing brake pedal
BMW AG - TIS
03.02.2013 23:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -