X Series E53 X5 3.0d (M57) OFFRD
51 14 110
Removing and installing/replacing rear model
designation
Important!
The "Instructions for number/letter combination cementing"
serve as the basis for these repair instructions and must be
followed without fail.
Stick on top edge of adhesive tape (1) parallel to bottom edge of
rear lid (2) at distance "A".
Mark measurement "B" from side edge (3) measured on top edge
of adhesive tape.
E53 dimensions:
A = 22 mm; B = 53 mm
E70 dimensions:
A = 20 mm; B = 57 mm
Note:
Measurement "C" is for information purposes only, as it is
determined by carrier film.
C= 8.7 mm
RA Removing and installing/replacing rear model designation
BMW AG - TIS
04.02.2013 01:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
