X Series E53 X5 3.0d (M57) OFFRD
If necessary, detach plug connection (1) with holder from center
armrest (2).
Remove both springs (1) on left/right from center armrest (2).
Installation:
Ensure ends of springs are in correct position.
Raise center armrest and drive out split pin (1) on left/right from
inside outwards.
Installation:
Fit split pin (1) with notch facing outwards in hinge (2).
Pull swivel arms (1) forwards.
Lever out trim(s) (2) and feed cable (3) out of swivel arms (1).
RA Removing and installing/replacing center armrest sliding unit
BMW AG - TIS
04.02.2013 01:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -