bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

15 RA Removing And Installing_replacing Valve Housing For Front Lumbar Support (normal > < 14 RA Removing And Installing Left Or Right Front Seat (normal _ Electric)
Page 2
background image

If necessary, unclip protective caps upwards.

Unfasten screws (3).

Move seat runners forward so that they are flush.

Unlock lock (1) and disconnect plug connection (2).

Caution!

Cover door sill with protective covers (risk of damage).

Lift out front seat.

Installation:

Floor carpet must not enter area between seat rails and floor
panel beside screw points (grating noises).

Tightening torque, 52 10 1AZ.

RA  Removing and installing left or right front seat (normal / electric)

BMW AG - TIS

04.02.2013  03:04

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

15 RA Removing And Installing_replacing Valve Housing For Front Lumbar Support (normal > < 14 RA Removing And Installing Left Or Right Front Seat (normal _ Electric)