X Series E53 X5 3.0d (M57) OFFRD
52 26 400
Replacing seat cover for rear seat (through-
loading system)
Special tools required:
•
52 0 050
Remove rear seat.
-
Release tension cable (1).
-
Lever tension cable out of wire eyes (2).
-
Cut through all retainers (3).
-
Carefully detach cover and in so doing cut through retainers
of trim wires.
Note:
Note position of clips.
-
Remove all remnants of clips from cover and support.
Installation:
Fit new retainers with special tool 52 0 050 . In so doing,
enclose existing wire in foam seat with retainer if necessary.
Feed trim wires into new cover.
RA Replacing seat cover for rear seat (through-loading system)
BMW AG - TIS
04.02.2013 03:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -