X Series E53 X5 3.0d (M57) OFFRD
64 11 208
Replacing heater core (automatic A/C)
Remove heater bulkhead.
Warning!
Danger of scalding!
Only perform this work after engine has cooled down.
Release hose clamps (1).
Detach water hoses (2) from flange (3). Carefully blow through
lines to remove remaining coolant from heating element.
Installation:
Fill and vent cooling system.
Remove trim panel for instrument panel.
Unclip air duct for left footwell (2) at mountings (1) and remove
in direction of arrow.
RA Replacing heater core (automatic A/C)
BMW AG - TIS
04.02.2013 05:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -