X Series E53 X5 3.0d (M57) OFFRD
67 31 501
Removing and installing/replacing drive for
longitudinal seat adjustment (front seat
removed)
Disconnect plug connection (1).
Unclip plug housing (2) in direction of arrow from retaining fixture
underneath.
Note:
Secure drive for longitudinal seat adjustment (4) against falling
out.
Release screws (3) and remove drive for longitudinal seat
adjustment (4) in direction of arrow from flange (5).
If necessary, remove inner drive shaft from drive for longitudinal
seat adjustment (4).
Installation:
Make sure drive shaft (1) is correctly seated.
Make sure drive for longitudinal seat adjustment (2) is correctly
seated on flange (3).
RA Removing and installing/replacing drive for longitudinal seat adjustment (front
BMW AG - TIS
04.02.2013 06:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -