X Series E53 X5 3.0d (M57TU) OFFRD
22 32 001
Replacing rubber mount for transmission
mounting
Special tools required:
•
22 1 011
•
22 1 012
•
22 1 013
•
22 1 016
•
33 3 144
Remove cross-member for transmission mounting.
Position special tool 22 1 016 on opening (2) and twist in screw
(3) hand-tight against housing.
Pull out rubber mount with special tools 22 1 011 /
33 3 144
and nut (1).
Nut (1) = nut M 12x1.5 of rubber mount screw M12x1.5x220.
Installation:
Arrow on rubber mount must point to arrow on housing.
Coat housing bore and rubber mount with Circolight, refer to
BMW Parts Service.
RA Replacing rubber mount for transmission mounting
BMW AG - TIS
05.02.2013 04:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
