X Series E53 X5 3.0d (M57TU) OFFRD
-
Remove propeller shaft from transmission.
-
Release center bearing.
-
Tie propeller shaft to one side.
Tasks are described in Removing propeller shaft.
Detach plug (1) from reversing light switch.
Release cable from retainers.
Detach plugs (1) and (2) from servomotor.
Note:
Pressure line of clutch slave cylinder remains connected.
Important!
Slowly relieve tension on clutch slave cylinder otherwise air is
drawn in through sealing sleeve.
Release nuts and remove clutch slave cylinder.
Tightening torque 21 52 5AZ
.
RA Removing and installing transmission (GS6-53DZ)
BMW AG - TIS
05.02.2013 04:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
