X Series E53 X5 3.0d (M57TU) OFFRD
24 00 023
Removing and installing automatic
transmission (6HP26Z)
Special tools required:
•
00 2 030
•
24 1 110
•
24 2 390
•
24 5 301
•
24 5 307
Important!
After completion of work, check transmission fluid level.
Use only the approved transmission fluid.
Failure to comply with this requirement will result in serious
damage to the automatic transmission!
Necessary preliminary tasks:
•
Disconnect battery.
•
Remove front underbody protection.
•
Remove reinforcement plate.
Important notes on installation are described in this work
step.
•
Remove complete exhaust system (M57TU only).
•
Remove centre muffler (N62 only).
•
Remove heat shield at front and rear.
•
Release stabilizer bar on stabilizer link on right and left and
slide forwards.
•
Remove propeller shaft from front differential.
RA Removing and installing automatic transmission (6HP26Z)
BMW AG - TIS
05.02.2013 04:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
