X Series E53 X5 3.0d (M57TU) OFFRD
Caution!
Do not let propeller shaft fall into joints.
Joints and rubber sleeve can be damaged on constant-velocity
joint.
Grip propeller shaft and release nuts.
Tightening torque, 26 11 6AZ.
Bend propeller shaft downwards at center mount (1).
Detach propeller shaft from transmission output flange and tie
back to side on vehicle underbody.
Unfasten screws.
Tightening torque, 27 1 2AZ.
Remove vibration damper (1).
Lift out retainer (1).
Take off washer (2).
Remove selector rod (3).
Installation:
Grease shift rod pin ().
Grease,
refer to BMW Service Operating Fluids.
RA Removing and installing shift lever
BMW AG - TIS
05.02.2013 04:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
