X Series E53 X5 3.0d (M57TU) OFFRD
34 33 071
Replacing vacuum hose for brake booster
(M57TU)
Important!
Before beginning work, fully press the brake pedal several
times to reduce the vacuum pressure in the brake booster.
This makes it easier to detach the vacuum hose.
Non-return valve and PA pipe are welded together and are
replaced together as a single unit.
Necessary preliminary tasks:
Read and comply with General Information.
Remove heater bulkhead.
Detach non-return valve (2) from brake booster.
Installation:
Check seal in brake booster and replace if necessary.
Release hose clip (1) and detach moulded hose (2).
Installation:
Replace hose clip.
RA Replacing vacuum hose for brake booster (M57TU)
BMW AG - TIS
05.02.2013 10:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -