X Series E53 X5 3.0d (M57TU) OFFRD
35 31 000
Removing and installing or replacing clutch
pedal
Remove panel and reinforcement plate.
Remove clutch switch.
Note:
Check function after installation.
Remove clips (1).
Release screws (2) and press out retaining pin for clutch master
cylinder.
Important!
Do not detach pressure line from clutch master cylinder.
Set down clutch master cylinder in footwell.
Detach retainer (3) for over-center helper spring.
Detach clutch pedal (1) in direction of arrow.
Installation:
Check bearing bushes (1) and replace if necessary.
Apply a light coat of grease to bearing bushes (1) and bore
(2).
RA Removing and installing or replacing clutch pedal
BMW AG - TIS
05.02.2013 10:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -