X Series E53 X5 3.0d (M57TU) OFFRD
Passenger seat only (replacing padding):
Installation:
Make sure foam is not extensively damaged (malfunction of
passenger seat occupancy detector).
Lay sensor mat connection without creasing into groove on
padding.
Fit new sensor mat (1) for passenger seat occupancy detector.
Align new sensor mat (1) on foam (2).
Guide connector (3) through hole (4).
Installation:
Detach liner (1) at individual points and stick sensor mat (2) onto
foam (3).
Liner is the protective film on adhesive area.
Note:
The operation "Replacing padding or sensor mat" ends here.
Replacing seat cover:
Pull trim threads (1) out of seat cover (2).
Cut new seat cover (2) to size and insert trim threads (1).
(3)
Seat heater cable
RA Replacing seat cover for left or right front seat (sports/electric)
BMW AG - TIS
05.02.2013 14:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 10 -
