X Series E53 X5 3.0d (M57TU) OFFRD
61 31 382
Replacing level switch for coolant
Warning!
Danger of scalding!
Only perform this work after engine has cooled down.
Release screws (1).
Raise expansion tank (2) slightly.
Installation:
Insert locating pin (1) into locating bore (2).
Important!
Do not damage connected water hoses.
Reposition expansion tank as far as possible until coolant
level switch (2) forms the highest point. This will prevent
coolant from escaping on opening.
If necessary, catch escaping coolant and feed back in later.
Disconnect plug connection (1).
Turn coolant level switch (2) approx. 90
°
in direction of arrow and
pull out.
RA Replacing level switch for coolant
BMW AG - TIS
05.02.2013 15:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -