X Series E53 X5 3.0d (M57TU) OFFRD
61 31 020
Removing and installing ignition switch
Remove upper section of steering column trim.
Remove lower section of steering column trim.
Unlock plug connection (1) and disconnect.
Loosen screws (1).
Move fixture (2) for wiring harness slightly.
Remove sealing varnish and release headless setscrews (1).
Detach ignition switch (2) in direction of arrow.
Installation:
Secure headless setscrews with sealing varnish.
RA Removing and installing ignition switch
BMW AG - TIS
05.02.2013 15:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
