X Series E53 X5 3.0d (M57TU) OFFRD
61 61 270
Removing and installing mounting bracket for
windshield wiper system completely with
motor
Special tools required:
•
61 6 250
Remove cover for cowl.
Pull out air funnel (1) on microfilter housing.
Remove screws (1) and (2).
Installation:
If necessary, replace damping ring upper/lower section.
Tighten screws (1) and (2) in specified sequence.
Observe tightening torque, 61 61 6AZ.
Release nut (3) with special tool
61 6 250 .
Installation:
If necessary, replace rubber buffer.
Fit nut (3) loosely.
Remove bracket for windshield wiper system (4) and disconnect
plug connection (5).
RA Removing and installing mounting bracket for windshield wiper system completely
BMW AG - TIS
05.02.2013 15:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
