bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Removing And Installing_replacing Video Module For On-board Monitor|Page 2534 > < 1 RA Removing And Installing_replacing Video Module For On-board Monitor
Page 2
background image

Release screws (1).

Release screws (1) and raise control unit holder (2).

Remove control unit holder (1) and disconnect all associated
plug connections.

Slacken nut (2) and remove radio module (3).

Press back retaining tabs (1).

RA  Removing and installing/replacing video module for on-board monitor

BMW AG - TIS

05.02.2013  17:02

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

1 RA Removing And Installing_replacing Video Module For On-board Monitor|Page 2534 > < 1 RA Removing And Installing_replacing Video Module For On-board Monitor