bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

ABOUT US
2 RA Removing And Installing_replacing Cylinder Head (M52TU _ M54 _ M56)|Page 449 > < 2 RA Removing And Installing_replacing Cylinder Head (M52TU _ M54 _ M56)

X Series E53 X5 3.0i (M54) OFFRD

Page 2
background image

Remove coolant pipe.

Note:

If the coolant pipe cannot be fed out:

Release banjo bolt (1) and disconnect oil pressure line for
VANOS adjustment unit.

Installation:

Replace O-ring on coolant pipe.

If necessary, replace sealing rings on banjo bolt (1).

Tightening torque of banjo bolt (1)  11 36 2AZ

.

Removal

Removal of cylinder head is described separately from installation.

Remove double VANOS adjustment unit.

Remove camshafts with bearing strips.

Release screw connection between timing case cover and
cylinder head.

Release screws, remove chain guide.

RA  Removing and installing/replacing cylinder head (M52TU / M54 / M56)

BMW AG - TIS

06.02.2013  11:09

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

2 RA Removing And Installing_replacing Cylinder Head (M52TU _ M54 _ M56)|Page 449 > < 2 RA Removing And Installing_replacing Cylinder Head (M52TU _ M54 _ M56)