X Series E53 X5 3.0i (M54) OFFRD
11 13 000
Removing and installing/replacing oil sump
(M54)
Special tools required:
•
00 0 200
•
00 0 201
•
00 0 202
•
00 0 204
•
00 0 208
•
00 2 030
•
11 0 020
•
31 2 220
•
51 2 170
Note:
To remove the oil sump, you must lower the front axle support.
There is no need to perform a front axle alignment check.
Remove heater bulkhead.
Lift engine hood into assembly position.
Note:
The following work must be carried out with a second person
assisting. Work instruction applies to left and right sides.
Gently raise retaining clip and simultaneously push upwards.
Hold engine hood, unhook damper on hood. Open engine hood
fully and reattach damper with special tool 51 2 170 to hood.
RA Removing and installing/replacing oil sump (M54)
BMW AG - TIS
06.02.2013 16:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
