X Series E53 X5 3.0i (M54) OFFRD
Remove cover for fuel injectors.
Remove upper section of suction filter housing with mass air flow
sensor.
Fit special tool 00 0 200 to special tool 00 0 201 /
00 0 202 / 00 0 204 / 00 0 208 and attach.
Attach special tool 11 0 020 as shown in illustration to special
tool 00 0 200 .
Secure special tool 11 0 020 to front and rear engine
suspension eyes.
Caution!
Make sure no lines or cables on rear side of engine are
damaged by chain.
The supports (1) of special tool 00 0 208 must make contact
with the screws on the side walls.
RA Removing and installing/replacing oil sump (M54)
BMW AG - TIS
06.02.2013 16:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
