X Series E53 X5 3.0i (M54) OFFRD
Note:
The timing is correctly set if the special tool 11 3 240 rests
without a gap on the cylinder head or protrudes up to 1 mm to the
inlet side.
The timing must be reset if the special tool 11 3 240 protrudes
to the exhaust side.
If necessary, adjust camshaft timing.
Detach compressed air connection.
Remove special tool 11 3 450 .
Fit oil pressure line with new seals.
Tightening torque 11 36 2AZ
.
Remove special tool 11 3 240 .
RA Checking camshaft timing (M52TU / M54 / M56)
BMW AG - TIS
06.02.2013 16:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
